Australian Hot Taps is Australia’s leading services Hot Tapping company located out of the Yarra Valley, Victoria. Australian Hot Taps has clients in all states and territories of Australia as well as the pacific Islands, we regularly fly in and out serving our clients.
Australian Hot Taps was established in 1996 and was the first company to be accredited by the office of Gas Safety (now Energy Safe Victoria) in 1998 to Hot Tap and Stop Off live gas lines.
Australian Hot Taps
We specialise in the Hot Tapping (also known as Wet Taps, Wet Tapping,Live Taps, Live Tapping, Under Pressure Taps, Under Pressure Tapping & UPT) of operating pipe lines , providing Hot Tap connections from 20mm through to 600mm. This means we are able to provide a valve teed into the existing operating pipe line without shutting, draining or stopping the flow in the pipeline.
Australian Hot Taps continues to innovate and are the only Australian Hot Tapping company that can provide size-on-size tappings on copper water lines (from 50mm through to 100mm), Install thermowells or thermometer pockets on copper water lines and do live Valve Insertions on Steel water lines (100mm through to 300mm) with the EZ2 Valve System.Read more
We generally provide a turnkey solution that is we attend site, weld or bolt a saddle to the pipe, install a plugged permanent valve for our clients use. This all completed without shutdown, draining, purging or isolation.
Australian Hot Taps innovative solutions include live thermowells, thermometer pockets, probes and flow meter installations in not only Steel lines but also in Copper and many other pipelines.
The way the EZ2 system has obsoleted traditional stopping and/or drain downs in the water market, we see as the future for regaining control of all under pressure operating systems.
Live Valve Insertion
Live Valve Insertion on operating pipelines is exciting and a great advance on having to either fully drain down or do (2) line stops and then drain down, or freeze lines, then cut in a new line valve.
Australian Hot Taps offer our clients Commercial and Industrial gas line sizing, Specialist gas reticulation high pressure, above and below ground, Off site steel fabrications, NDT of pipe wall thicknesses.
Australian Hot Taps are experts at pressure testing gas lines- at high or low pressure, we have all the equipment including the latest digital nanometers, twenty four (24) hour chart recorders, "Washington Type" leak detectors, bourdon gauges and electronic leak detectors. As well as the equipment we have the experience of pressurising the line with nitrogen ensuring the test is on for the correct length of time then either signing off on the line or advising our client of a leak that they may wish us to or themselves to locate.
Quite often we manufacture a custom designed product to seal the leak, so whether the leak is on an elbow, tee, flange or straight piece of pipe there is a solution that can be employed under pressure. Clamps for many pipes are held in stock so an immediate response is often available.
There are times when other methods of stopping the flow are not possible or cost effective; sometimes the solution is to squash off. Download the following document for more information.
Pipe freezing is a non-intrusive, cost effective and quick method to perform pipeline maintenance and modifications without the need to drain down the system. Pipe freezing offers huge benefits and savings versus draining and allowing air in the system. When you add up the time spent draining, refilling and purging trapped air from the system pipe freezing is the logical solution.
We can do under pressure live gas diversions on most gas pipelines. With our expertise in live tapping’s, squash offs and purging. We take care of it from start to finish without any interruption to the gas services.
What is Hot tapping?
Hot tapping, or pressure tapping, is the method of making a connection to existing piping or vessels without the interruption or emptying that section of pipe or vessel. Hot tapping is also the first procedure in line stopping, where a hole saw is used to make an opening in the pipe, so a line plugging head can be inserted. Hot tapping can be performed on pipes carrying natural gas, water, sewage, steam, petroleum products, and chemicals, and on most types of pipe.